Flush Fit™ Adaptor Plate

  • Flush Fit™ Adaptor Plate - White
  • Flush Fit™ Adaptor Plate - White - Unit sold separately

HC5PL1-W

Flush Fit™ Adaptor Plate

NA

ETL® Listed

1 year

NA

N


ADAPTOR PLATE INSTRUCTIONS FOR THE FLUSH FIT REGISTER BOOSTER™ MODEL HC500

ASSEMBLY INSTRUCTIONS 

Insert the HC500 Flush Fit Register Booster™ into the adaptor plate. The small tabs on the side of the Flulsh Fit Register Booster™ should snap into place when unit is installed in the adaptor plate.

 FLOOR MOUNT INSTRUCTIONS 4” X 12”, 6” X 10” & 6” X 12”

  1. Plug the small molded end of the power cord into the top of the Flush Fit Register Booster™.
  2. Plug the wall transformer end of the power cord into a 120 Volt AC outlet.
  3. Follow directions for operation settings before placing in register.
  4. Remove floor register and replace with the Flush Fit Register Booster™ and adaptor plate.

 

 

 WALL MOUNT INSTRUCTIONS 4” X 12”, 6” X 10” & 6” X 12”

  1. Locate and drill the 6” X 12” or 4” X 12” or 6” X 10” wall mount holes using a 3/16” drill bit.
  2. Drill (two) holes with a 3/16” drill bit from the bottom side of the Flush Fit Register Booster™ grille. The holes should be drilled in the pre-molded location as pictured below.
  3. Plug the small molded end of the power cord into the top of the Flush Fit Register Booster™.
  4. Plug the wall transformer end of the power cord into a 120 Volt AC outlet.
  5. Follow directions for operation settings before placing in register.
  6. Remove the wall register and replace with the assembled Flush Fit Register Booster™ and adaptor plate.
  7. Secure in place.

 

SUNCOURT INC.

P.O. Box 40
Durant, IA 52747-0040
1.800.999.FANS (3267)
www.suncourt.com

Copyright 1998-2017 Suncourt Inc. All Rights Reserved 

Unit Box Size Packaged Unit Weight Units per Case Case Size Case Weight
W D H lbs.   W D H lbs.
15" 8.25" 1" 0.50 6 14.50" 8.50" 7.25" 3.75
No videos for this product category.

FAQ'S GO HERE...