The DuctMuffler™ may be installed in new or existing ductwork between the source of noise and the register emitting noise. The best location is as close as possible to the source of noise, but not closer than 3 feet. The unit may be positioned so that either end faces toward the furnace. It is recommended that the unit be installed using sheet metal screws and standard metal duct support brackets (not supplied). The DuctMuffler™ may cause damage or injury should it fall. Finish the installation by sealing the joints with good quality aluminum foil duct tape.
Subject to the following limitations, Suncourt® Inc. (manufacturer) warrants that the DuctMuffler™ will, for 1 (one) year from date of original retail purchase, but not exceeding 2 (two) years from date of manufacture, remain free from appearance of defects in workmanship or materials. This warranty is subject to the following limitations: (a) manufacturer’s liability is limited to the replacement or repair of the unit, as decided by the manufacturer; (b) a defective unit must be returned, prepaid, with proof of purchase, well packaged to avoid damage in transit; and (c) this warranty does not apply to defects resulting from the alteration, abuse, accidental damage, unauthorized repair, or misuse of the unit. This warranty is given in lieu of all other warranties, guarantees, and conditions on manufacturer’s part, and the manufacturer shall have no tortious or other liability in respect to this DuctMuffler™. Ship unit to Suncourt® Inc. only after obtaining a Return Goods Authorization (RGA) number. Returns without this RGA number will not be accepted.Actual product appearance may differ from illustrations. Suncourt reserves the right to modify any or all of its products' features, designs, components and specifications without notice.
Copyright 1998-2017 Suncourt Inc. All Rights Reserved
Unit Box Size | Packaged Unit Weight | Units per Case | Case Size | Case Weight | ||||
---|---|---|---|---|---|---|---|---|
W | D | H | lbs. | W | D | H | lbs. | |
39.5" | 16.5" | 16.5" | 21 | 1 | 39.5" | 16.5" | 16.5" | 21 |
The Suncourt® DuctMuffler™ also sometimes known as a Duct Silencer is a passive device that is installed in ductwork to help attenuate (that means reduce) the level of noise that is transmitted through the duct.
You would use a Suncourt® DuctMuffler™ for loud, annoying sounds traveling through your ductwork from such sources as noisy air handlers, fans, a loud furnace or air conditioner, voices or music from other rooms. There are many applications but here are just a few:
The Suncourt® DuctMuffler™ is a completely passive device that will not impede airflow when it is attached to the ductwork. It is made of metal and is lined with an acoustic insulation that reduces sound. The insulation is covered with a wire mesh to keep the insulation in place.
The DuctMuffler™ will reduce sound traveling through ducts, i.e. loud music from adjacent rooms, snoring, speech and noise generated by the furnace blower.
Simply remove a section of air duct from the offending duct run and insert a DuctMuffler™. The DuctMuffler™ is a heavy product and must be properly supported using duct support brackets available at your favorite Home Center.
Please note that every 3 dBA in noise level reduction may cut your perception of noise by half. Visit the noise page in this FAQ section.
No. The open bore of the muffler is the same as the duct in which it is installed. There are no baffles or barriers.
No. No maintenance is required.
No, the DuctMuffler™ is a passive device.